Sureshield Active Plastic Protection

If you make products from plastic, then Sureshield Active Plastic protection is for you. Active Plastic inhibits odors and stains and prevents product degradation caused by bacteria, molds, mildews, and fungi. Active Plastic solutions are available for most types of plastic either in pellet or coating form.

Sureshield Active Plastic Antimicrobial Coating Protection Active Plastic Pellets

For most types of plastic, Active Plastic pellets can be added to your native resin prior to extrusion or molding at a low level of use. Active Plastic pellets become part of the overall plastic and do not affect color or physical properties. Active Plastic pellets are treated with an antimicrobial additive. When added to the resin, they provide built-in protection from the growth of odor and stain-causing bacteria, molds, mildews, and fungi on the plastic. Active Plastic pellets are easy to handle and can be transported by air, sea, or ground.

Active Plastic Coatings

Should you prefer, or need, to add a treatment to your plastic after you mold or extrude it, Active Plastic coatings are your answer. Available in liquid or powder form, Active Plastic coatings are specially designed for various plastic resins to inhibit the growth of odor and stain-causing bacteria, molds, mildews, and fungi on the coating as well provide antifingerprint and easy-to-clean properties.

Active Plastic liquid coatings can be sprayed on using conventional or advanced spray equipment and can be air dried or force dried with heat. All Active Plastic liquid coatings are waterborne, environmentally friendly and can be transported by air, sea, or ground.

Active Plastic powder coatings can be applied to plastic components that can withstand at least 275°F (135°C) and can hold a charge. With no VOC's, and up to 100% reclaimable use, Active Plastic powder coatings are environmentally friendly and efficient. All Active Plastic powder coatings are easy to handle and can be transported by air, sea, or ground.

Sureshield Active Plastic Protection is available for the following resins:

  • Acrylonitrile butadiene styrene (ABS)
  • Cellulose
  • Epoxy
  • Ethylene vinyl acetate (EVA)
  • Polyamide
  • Polycarbonate
  • Polyester
  • Polyethylene
  • Polyoxymethylene (POM)
  • Polypropylene
  • Polystyrene
  • Polyurethane
  • Polyvinyl chloride (PVC)
  • Thermoplastic Elastomer (TPE)
  • Thermoplastic Rubber (TPR)


  • Don't see your resin in the list above? Contact us.

    Disclaimer Information

    Sureshield is formulated with antimicrobials to help suppress the growth of odor and stain-causing microorganisms on the coating or on the plastic. Sureshield is not intended as a substitute for good hygiene or to prevent foodborne or infectious illnesses.